, “Comparisons of porous and adsorption properties of carbons activated by steam and KOH”, J Colloid Interface Sci, vol. 283, pp. 49-56, 2005.
, “Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption”, Chemosphere, vol. 56, pp. 493-501, 2004.
, “Utilization of agricultural waste corn cob for the preparation of carbon adsorbent”, J Environ Sci Health B, vol. 36, pp. 677-86, 2001.
, “Phenol adsorption onto powdered and granular activated carbon, prepared from Eucalyptus wood”, J Colloid Interface Sci, vol. 279, pp. 357-63, 2004.
, “Effect of activated carbons modification on porosity, surface structure and phenol adsorption”, J Hazard Mater, vol. 151, pp. 414-21, 2008.
Taxonomy upgrade extras:
, “Sampling of benzene in tar matrices from biomass gasification using two different solid-phase sorbents”, Anal Bioanal Chem, vol. 391, pp. 1409-17, 2008.
, “Effect of natural organic substances on the surface and adsorptive properties of environmental black carbon (char): pseudo pore blockage by model lipid components and its implications for N2-probed surface properties of natural sorbents”, Environ Sci Technol, vol. 39, pp. 7932-9, 2005.
, “Production and comparison of high surface area bamboo derived active carbons”, Bioresour Technol, vol. 99, pp. 8909-16, 2008.
, “Activated carbon from char obtained from vacuum pyrolysis of teak sawdust: pore structure development and characterization”, Bioresour Technol, vol. 96, pp. 1364-9, 2005.
, “Physicochemical properties of carbons prepared from pecan shell by phosphoric acid activation”, Bioresour Technol, vol. 98, pp. 1513-21, 2007.