Found 27 results
Author Keyword Title [ Type(Asc)] Year
Filters: Keyword is Adsorption  [Clear All Filters]
Journal Article
W. T. Tsai, Chang, C. Y., Wang, S. Y., Chang, C. F., Chien, S. F., and Sun, H. F., “Utilization of agricultural waste corn cob for the preparation of carbon adsorbent”, J Environ Sci Health B, vol. 36, pp. 677-86, 2001.
T. Miyoshi, Boki, K., and Tanada, S., “[Studies on the adsorption removal of ammonia gas. 1) Adsorption of ammonia gas on several kinds of activated carbons (author's transl)]”, Sangyo Igaku, vol. 18, pp. 169-76, 1976.
W. J. Braida, Pignatello, J. J., Lu, Y., Ravikovitch, P. I., Neimark, A. V., and Xing, B., “Sorption hysteresis of benzene in charcoal particles”, Environ Sci Technol, vol. 37, pp. 409-17, 2003.
M. M. Maroto-Valer, Lu, Z., Zhang, Y., and Tang, Z., “Sorbents for CO2 capture from high carbon fly ashes”, Waste Manag, vol. 28, pp. 2320-8, 2008.
S. Osipovs, “Sampling of benzene in tar matrices from biomass gasification using two different solid-phase sorbents”, Anal Bioanal Chem, vol. 391, pp. 1409-17, 2008.
M. Z. Alam, Muyibi, S. A., Mansor, M. F., and Wahid, R., “Removal of phenol by activated carbons prepared from palm oil mill effluent sludge”, J Environ Sci (China), vol. 18, pp. 446-52, 2006.
S. Yedla and Dikshit, A. K., “Removal mechanism of endosulfan sorption onto wood charcoal”, International Journal of Environment and Pollution, vol. 15, pp. 528 - 542, 2001.
G. Cornelissen, Kukulska, Z., Kalaitzidis, S., Christanis, K., and Gustafsson, O., “Relations between environmental black carbon sorption and geochemical sorbent characteristics”, Environ Sci Technol, vol. 38, pp. 3632-40, 2004.
A. W. Ip, Barford, J. P., and McKay, G., “Production and comparison of high surface area bamboo derived active carbons”, Bioresour Technol, vol. 99, pp. 8909-16, 2008.
M. Valix, Cheung, W. H., and McKay, G., “Preparation of activated carbon using low temperature carbonisation and physical activation of high ash raw bagasse for acid dye adsorption”, Chemosphere, vol. 56, pp. 493-501, 2004.
H. W. Hung and Lin, T. F., “Prediction of the adsorption capacity for volatile organic compounds onto activated carbons by the Dubinin-Radushkevich-Langmuir model”, J Air Waste Manag Assoc, vol. 57, pp. 497-506, 2007.
R. L. Tseng and Tseng, S. K., “Pore structure and adsorption performance of the KOH-activated carbons prepared from corncob”, J Colloid Interface Sci, vol. 287, pp. 428-37, 2005.
Y. M. Hsieh, Tsai, M. S., and Yen, F. S., “Pore size and adsorptive capacity of unburned carbon affected by gasification with carbon dioxide”, J Environ Sci Health A Tox Hazard Subst Environ Eng, vol. 39, pp. 2143-55, 2004.
Y. Guo and Rockstraw, D. A., “Physicochemical properties of carbons prepared from pecan shell by phosphoric acid activation”, Bioresour Technol, vol. 98, pp. 1513-21, 2007.
S. Wang, Zhu, Z. H., Coomes, A., Haghseresht, F., and Lu, G. Q., “The physical and surface chemical characteristics of activated carbons and the adsorption of methylene blue from wastewater”, J Colloid Interface Sci, vol. 284, pp. 440-6, 2005.
N. Tancredi, Medero, N., Moller, F., Piriz, J., Plada, C., and Cordero, T., “Phenol adsorption onto powdered and granular activated carbon, prepared from Eucalyptus wood”, J Colloid Interface Sci, vol. 279, pp. 357-63, 2004.
R. L. Tseng, “Mesopore control of high surface area NaOH-activated carbon”, J Colloid Interface Sci, vol. 303, pp. 494-502, 2006.
Suhas, Carrott, P. J., and Ribeiro Carrott, M. M., “Lignin--from natural adsorbent to activated carbon: a review”, Bioresour Technol, vol. 98, pp. 2301-12, 2007.
T. H. Nguyen, Cho, H. H., Poster, D. L., and Ball, W. P., “Evidence for a pore-filling mechanism in the adsorption of aromatic hydrocarbons to a natural wood char”, Environ Sci Technol, vol. 41, pp. 1212-7, 2007.
J. J. Pignatello, Kwon, S., and Lu, Y., “Effect of natural organic substances on the surface and adsorptive properties of environmental black carbon (char): attenuation of surface activity by humic and fulvic acids”, Environ Sci Technol, vol. 40, pp. 7757-63, 2006.
S. Kwon and Pignatello, J. J., “Effect of natural organic substances on the surface and adsorptive properties of environmental black carbon (char): pseudo pore blockage by model lipid components and its implications for N2-probed surface properties of natural sorbents”, Environ Sci Technol, vol. 39, pp. 7932-9, 2005.
G. G. Stavropoulos, Samaras, P., and Sakellaropoulos, G. P., “Effect of activated carbons modification on porosity, surface structure and phenol adsorption”, J Hazard Mater, vol. 151, pp. 414-21, 2008.
L. C. Bornemann, Kookana, R. S., and Welp, G., “Differential sorption behaviour of aromatic hydrocarbons on charcoals prepared at different temperatures from grass and wood”, Chemosphere, vol. 67, pp. 1033-42, 2007.
F. C. Wu, Tseng, R. L., and Juang, R. S., “Comparisons of porous and adsorption properties of carbons activated by steam and KOH”, J Colloid Interface Sci, vol. 283, pp. 49-56, 2005.
S. el-Kheshen, Zia, H., Badawi, A., Needham, T. E., and Luzzi, L. A., “Coating charcoal with polyacrylate-polymethacrylate copolymer for haemoperfusion. III: The effect of the coat thickness on the adsorptioncapacity of the coated charcoal and its adsorptivity to small and middle size molecules”, J Microencapsul, vol. 12, pp. 505-14, 1995.
R. L. Tseng and Tseng, S. K., “Characterization and use of high surface area activated carbons prepared from cane pith for liquid-phase adsorption”, J Hazard Mater, vol. 136, pp. 671-80, 2006.
D. M. Nevskaia, Castillejos-Lopez, E., Munoz, V., and Guerrero-Ruiz, A., “Adsorption of aromatic compounds from water by treated carbon materials”, Environ Sci Technol, vol. 38, pp. 5786-96, 2004.